MANITOU

Manitou MI 30 D ST5

A seated diesel counterbalance forklift for routine material movement across warehouses, production sites, loading areas and prepared yards.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
Manitou MI 30 D ST5 industrial diesel counterbalance forklift
Manitou MI 30 D ST5
At a glance

Key specifications

Rated capacity
3,000 kg
At 500 mm load centre; residual capacity varies
Maximum lift-height range
Up to 6,500 mm
Requires the applicable mast configuration
Turning radius
2,460 mm
Published exact-model value
Service weight
4,610 kg
Reviewed configuration
Engine output
37.4 kW
Kubota V2607-CR-E5B Stage V
Overall width
1,225 mm
Single-wheel configuration
Equipment profile

Built around the project configuration

The Manitou MI 30 D ST5 is a seated diesel counterbalance forklift for routine material movement across warehouses, production sites, loading areas and prepared yards. Its 3,000 kg rating at a 500 mm load centre covers a common industrial handling class, while the compact chassis keeps the published turning radius to 2.46 m.

Mast options extend the working range to 6.5 m and allow the truck to be configured around lift height, free-lift and closed-height requirements. A Kubota Stage V engine, solid-tyre running gear and attachment-ready hydraulics support mixed industrial duties where diesel operation is appropriate.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Capacity, mast and forks

Rated capacity 3,000 kg at 500 mm load centre
Maximum available lift-height range Up to 6,500 mm
Standard mast reference FVD 33
Available mast families Full-visibility duplex, free-lift duplex and free-lift triplex
Fork carriage ISO 2328 class 3A
Fork carriage width 1,100 mm
Published fork dimensions 45 × 122 × 1,150 mm

Dimensions and running gear

Overall length 3,865 mm including published forks
Length to fork face 2,715 mm
Overall width 1,225 mm on single wheels
Height to overhead guard 2,130 mm
Wheelbase 1,700 mm
Ground clearance below mast 130 mm
Ground clearance at wheelbase centre 200 mm
Turning radius 2,460 mm
Aisle width, 1,000 × 1,200 mm pallet crossways 4,140 mm
Aisle width, 800 × 1,200 mm pallet lengthways 4,340 mm
Tyres Solid industrial tyres in the reviewed configuration

Performance and brakes

Travel speed laden/unladen 18.0 / 18.5 km/h
Lifting speed laden/unladen 0.49 / 0.52 m/s
Lowering speed laden/unladen 0.43 / 0.48 m/s
Gradeability laden/unladen 20 / 20 percent
Service brake Hydraulic
Low-speed load approach Inching control

Engine, weight and hydraulics

Engine Kubota V2607-CR-E5B four-cylinder diesel
Emissions standard EU Stage V
Rated output 37.4 kW at 2,400 rpm
Displacement 2,615 cm³
Service weight 4,610 kg
Attachment circuit pressure 160 bar
Attachment hydraulic flow 35 L/min
Published operator-ear noise level Below 84 dB
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support