TADANO

Tadano AC 5.250L-2

A five-axle all-terrain crane for long-reach lifting across urban construction, industrial plants and infrastructure projects.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
Tadano AC 5.250L-2 five-axle all-terrain crane
Tadano AC 5.250L-2
At a glance

Key specifications

Maximum crane capacity
250 t
Applicable chart and special equipment; not universal capacity
Maximum load moment
736 tm
Manufacturer headline figure
Telescopic main boom
13.5–79 m
Long-boom L model
Maximum system length
109 m
Requires applicable extension configuration
Maximum tip height
113 m
Configuration dependent
Engine output
390 kW
Mercedes-Benz OM471LA at 1,600 rpm
Equipment profile

Built around the project configuration

The Tadano AC 5.250L-2 is a five-axle all-terrain crane for long-reach lifting across urban construction, industrial plants and infrastructure projects. Its 13.5–79 m telescopic main boom provides substantial reach directly from the carrier, while compatible extension arrangements take the system length to 109 m.

Road-going transport configurations and independently positioned outriggers support movement between varied jobsites. IC-1 Plus matches main-boom capacity to the programmed outrigger setup and slewing sector, helping crews plan lifts where working space, ballast and access are constrained.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Boom and lifting system

Maximum crane capacity 250 t under the applicable chart and special-equipment condition
Maximum load moment 736 tm
Telescopic main boom 13.5–79 m
Boom elevation Approximately -1° to +85°
Boom-extension range 5.8–30 m
Maximum system length 109 m
Maximum tip height 113 m
Maximum working radius 88 m

Hoists and controls

Maximum hoist-rope speed 120 m/min
Maximum line pull 98.2 kN
Hoist-rope diameter 21 mm
Maximum slewing speed 1.1 rpm
Load-moment system IC-1
Variable setup control IC-1 Plus for programmed asymmetric outrigger configurations
Telematics IC-1 Remote
Visibility option Tadano Surround View

Carrier and outriggers

Axles Five steered axles
Standard drive 10 × 6 × 10
Optional drive 10 × 8 × 10
Transmission ZF TraXon automated manual
Suspension Hydropneumatic with axle-load compensation
Full outrigger base 9.31 × 8.30 m
Maximum road speed Up to 85 km/h, subject to tyres and local law
Approximate transport envelope 15.59 × 3.00 × 3.99 m

Power and operating package

Engine Mercedes-Benz OM471LA diesel
Rated output 390 kW at 1,600 rpm
Maximum torque 2,600 Nm at 1,300 rpm
Emissions package EU Stage V / Tier 4 Final
Diesel capacity 647 L
AdBlue capacity 40 L
Maximum counterweight 80 t
Efficiency controls Eco Mode and engine start/stop
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support