LINK-BELT

Link-Belt 65|HT

A four-axle telescopic truck crane for road-mobile lifting across construction, utilities, infrastructure and industrial sites.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
Link-Belt 65|HT telescopic truck-mounted crane
Link-Belt 65|HT
At a glance

Key specifications

Metric rated capacity
55 t at 2.5 m radius
Metric chart; full outriggers and 360-degree rotation
Telescopic main boom
11.2–35 m
Four-section full-power boom
Optional lattice fly
8.7–15.5 m
Offsettable at 2°, 20° or 40°
Maximum tip height
52.2 m
Requires the full fly arrangement
Engine output
276 kW
Cummins L9 at 1,700 rpm
Maximum road speed
97.65 km/h
Defined carrier configuration
Equipment profile

Built around the project configuration

The Link-Belt 65|HT is a four-axle telescopic truck crane for road-mobile lifting across construction, utilities, infrastructure and industrial sites. Its 11.2–35 m full-power boom supports fast taxi-crane deployment, while an onboard two-piece fly extends the maximum tip height to 52.2 m.

Five-outrigger support and CALC selectable positions provide charted setups for open or constrained work areas. The 8 × 4 carrier, modular counterweight and highway transmission are arranged for travel between jobs without treating the machine as an off-road rough-terrain crane.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Boom and lifting system

Metric rated capacity 55 t at 2.5 m radius
Telescopic main boom 11.2–35 m
Boom elevation Approximately -2.5° to +78°
Optional lattice fly 8.7–15.5 m
Fly offsets 2°, 20° and 40°
Maximum tip height 52.2 m with full fly
Boom extension system Four-section full power with two extension modes

Hoists and controls

Maximum first-layer line pull 70.65 kN
Maximum high-range rope speed 140.8 m/min
Main-rope length 167.6 m
Maximum slewing speed 2.5 rpm
Crane operating system Link-Belt Pulse rated-capacity and diagnostics
Variable setup control CALC selectable outrigger positions
Camera package Link-Belt Vision
Telematics Cellular crane and engine monitoring

Carrier and outriggers

Carrier Four-axle 8 × 4
Axle arrangement Tandem front steering and tandem rear drive
Transmission ZF AS-Tronic automated manual
Gears 12 forward and 2 reverse
Suspension Front and rear walking-beam air suspension
Outriggers Four main outriggers plus front bumper outrigger
Maximum full outrigger spread Approximately 6.9 m overall
Approximate travel envelope 12.0 × 2.6 × 3.4 m
Maximum road speed 97.65 km/h in documented configuration

Power and transport package

Engine Cummins L9 8.9 L six-cylinder diesel
Rated output 276 kW at 1,700 rpm
Maximum torque 1,694.7 Nm at 1,400 rpm
Fuel capacity 283.9 L
Diesel exhaust fluid capacity 37.8 L
Standard counterweight 5.2 t
Optional counterweight packages 6.8 or 8.4 t
Base documented weight Approximately 29,425 kg before listed options
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support