SCHWING

SCHWING S 43 SX

A five-section truck-mounted boom pump for medium- and long-reach concrete placement.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
SCHWING S 43 SX truck-mounted concrete boom pump
SCHWING S 43 SX
At a glance

Key specifications

Vertical reach
42.3 m
Five-section 43 RZ boom
Net horizontal reach
34.8 m
From front of outriggers; chassis dependent
Maximum reach depth
29.9 m
Published boom geometry
Maximum theoretical output
Up to 162 m³/h
P2525 pump-kit reference
Maximum concrete pressure
85 bar
Not simultaneous with maximum output
Operating weight
Under 32 t
Reviewed chassis reference
Equipment profile

Built around the project configuration

The SCHWING S 43 SX is a five-section truck-mounted concrete pump for building and civil pours that need more coverage than a mid-30 m boom can provide. Its 43 RZ boom reaches 42.3 m vertically, 34.8 m horizontally on a net basis and 29.9 m below the pump level.

Different pump kits let the machine be configured around placing volume and operating requirements. The largest reviewed P2525 arrangement provides up to 162 m³/h at a published maximum concrete pressure of 85 bar, while the P2023 is available in two hydraulic-drive configurations.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Boom and reach

Boom sections 5
Boom system 43 RZ
Vertical reach 42.30 m
Gross/net horizontal reach 37.55 / 34.80 m
Maximum reach depth 29.90 m
Folding height 8.55 m
Slewing range 2 × 365 degrees
End hose 4.00 m
Delivery pipeline DN 125

Pump configurations

P2023 at 535 L/min 136 m³/h, 85 bar, 27 strokes/min maximum theoretical
P2023 at 636 L/min 161 m³/h, 85 bar, 32 strokes/min maximum theoretical
P2525 at 636 L/min 162 m³/h, 85 bar, 22 strokes/min maximum theoretical
P2023 delivery cylinders 230 × 2,000 mm
P2525 delivery cylinders 250 × 2,500 mm
Concrete valve B-ROCK
Hydraulic system Open system
Operating qualification Maximum output and maximum pressure are not simultaneous

Support and chassis

Full front/rear support width 7.95 / 8.30 m
Maximum front/rear support loads 240 / 240 kN
Water tank 610 L
Reference operating weight Under 32 t
Carrier Four-axle truck chassis
Chassis qualification Dimensions, road mass and emissions configuration depend on selected build
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support