KLEMM

KLEMM KR 801-3GK

An 11 t long-reach anchor rig for slopes, excavation support, soil nails, and difficult drilling points above or below the carrier.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
KLEMM KR 801-3GK long-reach anchor drilling rig
KLEMM KR 801-3GK
At a glance

Key specifications

Engine output
129 kW
CAT C4.4, Stage V / Tier 4 Final
Overall width
2.2 m
Manufacturer compact-dimensions statement
Published rig weight
11.0 t
Exact-model technical table
Boom swing
Up to 90°
Over the right-hand crawler
Feed / retraction force
30 / 30 kN
Mast 140-1 or 140-2
Main hydraulic flow
2 × 150 L/min
Load-sensing circuits
Equipment profile

Built around the project configuration

The KLEMM KR 801-3GK is a compact long-reach drilling rig for anchors, soil nails, and small- to medium-diameter foundation holes at difficult positions. Its articulated boom can move the mast above or below the setup level and swing over the right-hand crawler, helping crews reach slopes, excavation faces, and elevated drilling points without positioning the carrier directly beside every hole.

A 129 kW diesel engine supplies two 150 L/min load-sensing main circuits. Two mast lengths, rotary-head or hydraulic-drifter arrangements, and a 360° mast rotator allow the drilling package to be planned around the site's geometry, hole orientation, ground conditions, and support method.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Engine and hydraulics

Engine CAT C4.4 diesel
Rated output 129 kW
Emissions EU Stage V / USA EPA Tier 4 Final
Fuel capacity 330 L
DEF capacity 19 L
Main hydraulic circuits 2 × 150 L/min, load-sensing
Auxiliary circuits 25 L/min and 20 L/min; optional 40 L/min fifth circuit
Maximum operating pressure 350 bar
Hydraulic-oil capacity 550 L

Long-reach positioning and carrier

Articulated-boom swing Up to 90° over the right-hand crawler
Mast rotator 360°
Overall width 2.2 m
Operating weight 11.0 t
Maximum tractive force 100 kN
Travel speed 1.6 km/h
Track oscillation +15° / −10°
Ground clearance 295 mm
Published ground pressure 67 kN/m²

Mast and drill equipment

Mast 140-1 frame length 3,600 mm
Mast 140-2 frame length 4,500 mm
Feed and retraction force 30 kN
Feed and retraction rate 18 m/min
Fast feed and retraction 75 m/min
Largest documented rotary head KLEMM KH 11-1
Largest documented hydraulic drifter KLEMM KD 1011

Controls, safety, and monitoring

Operation Standard mobile radio remote control
Machine display Color LCD display and operator panel
Functional safety Performance Level C under ISO 13849
Operating modes ROM and SPM under EN 16228
Telematics Optional KLEMM DataLink Air
Sound power level 106 dB(A) LWAd
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support