SANDVIK

SANDVIK COMMANDO DC300Ri

A compact radio-controlled surface top-hammer rig for mobile construction, quarry, trenching and secondary-breaking work.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
SANDVIK COMMANDO DC300Ri compact surface top-hammer drill rig
SANDVIK COMMANDO DC300Ri
At a glance

Key specifications

Hole-diameter range
38–64 mm
Recommended range
Hydraulic rock drill
HL300, 9 kW
Sandvik top-hammer system
Flushing air
3.0 m³/min at up to 8 bar
Onboard compressor
Engine output
74.4 kW
CAT C3.6 at 2,200 rpm
Drilling coverage
12 m²
Published boom coverage
Dry weight
6,100 kg
Manufacturer dry-weight value
Equipment profile

Built around the project configuration

The SANDVIK COMMANDO DC300Ri is a compact surface top-hammer drill designed for mobile construction and quarry work. Its four-wheel oscillating carrier, articulated boom and full radio control support frequent repositioning across road, trenching, secondary-breaking and drill-and-blast projects.

The rig combines a 38–64 mm recommended hole range with the 9 kW Sandvik HL300 rock drill and onboard flushing air. Its compact transport envelope and flexible boom geometry make it a practical model reference for contractors working across changing sites and drilling angles.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Rock drill and feed

Drilling method Top hammer
Recommended hole diameter 38–64 mm
Drill steels R28, R32 or T35 MF rods
Hydraulic rock drill Sandvik HL300, 9 kW
Rock-drill travel 4,065 mm
Starter-rod hole depth 3,800 mm
Maximum retraction force 20 kN
Maximum drilling feed 6.5 kN

Boom and mobility

Boom DB300 articulated
Boom reach 4.3 m
Drilling coverage 12 m²
Boom swing ±45°
Carrier oscillation ±10°
Maximum tramming force 43 kN
Ground clearance 380 mm

Power, air and transport

Engine CAT C3.6
Rated output 74.4 kW at 2,200 rpm
Emissions configurations Tier 3, Tier 4 Final or Stage V
Flushing-air capacity 3.0 m³/min at up to 8 bar
Transport dimensions 5.7 × 2.35 × 2.85 m
Dry weight 6,100 kg

Controls and configurable equipment

Primary controls Sandvik SICA PLC electrohydraulics with full radio remote control
Drilling control iTorque, automatic collaring and antijamming
Dust collection Hydraulic dust-collection system
Rod handling Optional one-rod handler
Positioning options Hydraulic rollover and hole-angle, depth and alignment systems
Site packages Optional water flushing, enhanced dust control and remote monitoring
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support