EPIROC

EPIROC FlexiROC T15 R

An ultra-compact radio-controlled top-hammer rig for small civil-engineering, rock-reinforcement and dimension-stone projects.

Equipment inquiry

Discuss the required working method, configuration, delivery location, and project timeline with Vernep.

Request equipment
EPIROC FlexiROC T15 R ultra-compact surface top-hammer drill rig
EPIROC FlexiROC T15 R
At a glance

Key specifications

Hole-diameter range
27–51 mm
Rock-drill configuration dependent
Maximum hole depth
9 m
Applicable extension-drilling setup
Rock-drill output
4.5 or 5.5 kW
COP 1022 / COP 1028
Engine output
48 or 55 kW
Regional/configuration dependent
Air capacity
23 l/s at up to 8.5 bar
Onboard compressor
Published weight
3,400–3,570 kg
Webpage / January 2026 brochure
Equipment profile

Built around the project configuration

The EPIROC FlexiROC T15 R is an ultra-compact surface top-hammer rig for small civil-engineering, rock-reinforcement and dimension-stone projects. Its four-wheel skid-steer carrier, full radio control and flexible feed positioning support work across confined construction sites and changing drilling angles.

COP 1022 and COP 1028 rock-drill configurations cover a combined recommended hole range of 27–51 mm. The rig can support foundation rock drilling, trenching, boulder blasting and extension drilling while retaining a transport width of 1.77 m.
Technical data

Detailed specifications

Performance data grouped for quick review and comparison.

Rock drills and hole range

Drilling method Top hammer
Combined recommended hole range 27–51 mm
COP 1022 configuration 27–45 mm, HEX 22 × 108, 4.5 kW
COP 1028 configuration 33–51 mm, R28/SR28/R32/SR32, 5.5 kW
Maximum configured hole length 9 m
Drill-rod length 3,660 mm

Feed and positioning

Feed extension 600 mm
Maximum feed rate 1.5 m/s
Maximum feed force 4 kN
Maximum tractive pull 6 kN
Feed travel 3,555 mm
Feed positioning Manual 360° positioning in 45° steps; hydraulic rollover optional

Power, air and transport

Engine output 48 or 55 kW, configuration dependent
January 2026 brochure engine CAT C2.2 TA, Tier 4 Final / Stage V
Air capacity 23 l/s at normal working pressure
Maximum air pressure 8.5 bar
Transport dimensions 4,950 × 1,770 × 2,250 mm
Published weight 3,400–3,570 kg

Mobility, controls and options

Maximum tramming speed 3.5 km/h
Traction force 20 kN
Ground clearance 230 mm
Primary controls Full radio control for drilling, boom and tramming
Rod handling Hydraulic drill-rod support
Selected options Winch, chain tracks, hole-angle instrument and water-mist equipment
Dust collection DCT T15 system
Equipment inquiry

Match the machine to your project.

Send Vernep the required drilling method, pile diameter, target depth, ground conditions, available working height, delivery location, and project timing. We will use those details to review a suitable configuration or available unit.

Request equipment support